Table of Contents
Advertisement
Setting Up a WAP Gateway
To access Wireless Access Point (WAP) sites through Internet Explorer Mobile, configure your device
to use a WAP gateway.
Before you begin, obtain the following information from your Internet Service Provider (ISP), mobile
phone service provider, or network administrator:
●
User name
●
Password
●
ISP server phone number
●
WAP gateway server name
●
Port number
1.
Tap Start > Settings > Connections tab > Connections > Advanced tab > Select Networks >
Edit... button. If a proxy server has not been set up, tap the New... button.
2.
On the Proxy Settings tab, select the This network connects to the Internet and This network
uses a proxy server to connect to the Internet check boxes.
3.
If necessary, in the Proxy server box, enter the proxy server name.
4.
Tap Advanced > WAP.
5.
In the Server box, enter the WAP gateway server name. Under Port, enter the port number. The
most common WAP port number is 9201.
6.
Enter any logon credentials required by the WAP gateway server.
ENWW
Setting Up a WAP Gateway
31
Advertisement
Table of Contents
