Table of Contents
Advertisement
Infrared
Beaming an Item
In the Calendar, Contacts, Notes, Tasks, Excel Mobile, Word Mobile, and PowerPoint Mobile, you can
beam files and information to other devices using infrared.
1.
From the program, select the item you want to beam, such as an appointment in Calendar, a task
in Tasks, a contact card in Contacts, or a file in File Manager.
2.
Tap Menu > Beam.
3.
Align the infrared (IR) ports at close range until the target device name appears, then tap the device
to which you want to send the item.
CAUTION
workbook was created on a computer, unsupported content and formatting may be lost when the
files are saved.
NOTE
Connections tab > Beam, and select the Receive all incoming beams check box.
Receiving an Infrared Beam
If you set your HP iPAQ to receive all incoming infrared (IR) beams, it detects and notifies you of IR
beams.
1.
Tap Start > Settings > Connections tab > Beam.
2.
Select the Receive all incoming beams check box.
3.
Be sure your HP iPAQ is turned on and within close range of the device that is beaming the
information.
4.
When prompted to receive an incoming beam, tap Yes to receive the beamed information.
Synchronizing with the Infrared Connection
As an alternative to using the mini-USB cable, you can synchronize your HP iPAQ and your computer
using the infrared connection if you have an infrared port or an infrared USB adapter installed on your
computer. The infrared connection option works only on computers that have Microsoft Windows 2000
or XP operating systems installed.
To set up an infrared connection to a computer:
1.
Synchronize your HP iPAQ with your computer using the mini-USB cable before the first time you
establish an ActiveSync connection via infrared.
2.
Follow your computer manufacturer's instructions to install and set up an infrared port.
3.
Remove the HP iPAQ from mini-USB cable and line up the infrared port with the computer infrared
port so they are unobstructed and within 12 inches (30.5 cm) of each other.
48
Chapter 3 Connections
Files are saved automatically before they are beamed. If a Word document or Excel
If you want your HP iPAQ to detect or receive beams, tap Start > Settings >
ENWW
Advertisement
Table of Contents
