Accessories; Specifications; Operating System Support - MikroTik LHG 60G Quick Start Manual

Release the button when the LED turns solid green to clear all configuration and defaults.
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS
over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
LED status
The device includes precise alignment guides using LEDs. The lights indicate with arrows direction to turn the dish if looking from behind the dish to the
other end of the link. When alignment LEDs turn off, leaving only the "link established" LED, it means alignment is complete. The LED lights are:
Tilt-up.
Tilt down.
Rotate to right.
Rotate to left.
LED on when the link established.
LED on when Ethernet connected.
User-configurable LED.
Power state on.

Accessories

Package includes the following accessories that come with the device:
K-LHG screw set/fastening set.
Gigabit POE injector.
LHG-5G-390 mm Dish (mesh size 0.5 t x1.0 wx1.4 mm ).
EU/US Switching Power Supply 24 V , 0.38 A, 9 W, Level VI, cable:1.5 m.
Hose Clamp SUS304 (Philips type; clamping diameter range 35-70 mm).
BRAC1_ LHG montage element.
DynaDish U-Bolt M8 (A2 Stainless Steel).
QuickMount AIM.

Specifications

For more information about LHG products, specifications and pictures please visit our web page:

Operating system support

https://mikrotik.com/product/lhg_60g