Table of Contents
Advertisement
BlitzUG.book Page 19 Wednesday, July 12, 2000 2:59 PM
Using the Flash
When the camera is turned on, the flash setting defaults to
setting is indicated by an icon on the status LCD:
Auto Flash The camera
determines the need for a flash
based on lighting conditions.
Flash Off Set the flash to Off
when you want to be sure the flash
is not used.
To adjust the flash:
1.
Slide the
mode
2.
Press the
menu
3.
Turn the
dial to highlight the current
menu
4.
Turn the
dial to highlight a
menu
www.hp.com/photosmart
Auto Flash with Red-eye
reduction Minimizes the occurrence of
red-eye in photos of people or animals.
The flash goes off twice—once to
condition the subject's eyes for the flash,
and a second time to take the photo.
Fill Flash Set the flash to Fill when the
lighting for the entire photo is sufficient,
but the lighting for the subject is not, as
in a backlighting situation.
switch up to the camera icon.
dial to display the Capture menu on the image LCD.
Flash
setting, then press the
Flash
. The flash
Auto Flash
icon, then press the
dial.
menu
dial.
menu
19
Advertisement
Table of Contents
