Table of Contents
Advertisement
BlitzUG.book Page 11 Wednesday, July 12, 2000 2:59 PM
Chapter 2: Taking Photos
1.
Slide the
mode
After you turn the camera on, the Flash charges. Once the flash icon on
Note:
the status LCD stops blinking, the camera is ready to take a photo.
2.
Adjust the camera settings as needed.
•
You can change the photo quality, flash or focus setting or use the self-timer
or digital zoom. See "Chapter 3: Adjusting the Camera Settings" on
page 17 for details.
3.
Frame your subject in the viewfinder.
4.
Press the
shutter
the exposure.
5.
When you see the green light next to the viewfinder, press the
the way down to take the photo.
Your photo appears on the image LCD while it is saved to the CompactFlash
memory card. If you want to immediately delete the photo while it is being saved,
press the
menu
www.hp.com/photosmart
switch up to the camera icon to turn the camera on.
button half way down to allow the camera to focus and adjust
dial.
button all
shutter
11
Advertisement
Table of Contents
