BlitzUG.book Page 54 Wednesday, July 12, 2000 2:59 PM
Problem
Possible Cause
There may be a serial
port conflict.
I can't delete a
The photo is locked.
photo.
My photo turned
The subject moved
out blurry.
while you were taking
the photo.
You moved the camera
while you were taking
the photo.
Your subject was too
close to the camera
lens.
54
Solution
Check the windows device manager for device conflicts
or errors. Go to www.hp.com/photosmart and
click on "Technical Support" for more information.
Unlock the photo.
For sharp focus, if possible, ask the subject to stay still.
Hold the camera steady as you press the shutter
button.
The camera's Auto Focus range is 2 feet (60cm) from
the front of the lens to infinity. For a clear, sharp image,
make sure your subject is not closer than 2 feet (60cm)
or use the Macro mode.
hp photosmart 210 digital camera user's guide