Related Manuals for Raycus RFL-P70QA
Summary of Contents for Raycus RFL-P70QA
- Page 1 版本号 密级 内部 阶段 标记 RFL-P70QA 会签 70QA 激光器英文说明书 帅维文 邓俊杰 RFL-P70QA·JS02 王晓民 部 门 脉冲激光器技术研究部 编 写 陶斌凯 校 对 颜鹏晖 审 核 李科 标 审 李其军 批 准 黄保 武汉锐科光纤激光技术股份有限公司 旧底图登记 号 底图登记号...
- Page 2 User Instruction RFL-P70QA Wuhan Raycus Fiber Laser Technologies CO., Ltd. 2021...
- Page 3 Raycus pulsed fiber laser is classified as a high power Class IV laser device. Before supplying the power to the device, please make sure that the correct voltage of 24 VDC power source is connected and the anode and cathode are right.
-
Page 4: Table Of Contents
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P70QA Pulsed Fiber Laser User’s Guide V2.1 Content Description....................1 1.1. Product description......................1 1.2. Actual configuration list....................1 1.3. Environmental requirements and cautions..............1 1.4. Specifications......................... 2 Mounting....................3 Mounting dimensions.....................3 Method of installation....................3 Control Interface.................. - Page 5 Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P70QA Pulsed Fiber Laser User’s Guide V2.1...
-
Page 6: Description
Caution: Make sure the corresponding wires of the device are properly grounded. b) All the maintenance to the device should only be done by Raycus, because there is no replacement or accessory provided with the device. Please do not try to damage the labels or open the cover in order to prevent against electric shock, or the warranty will be invalid. -
Page 7: Specifications
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P70QA Pulsed Fiber Laser User’s Guide V2.1 if laser is mounted in a cabinet with fans, the direction should be same as laser’s fans. g) Do not look into the output head of the device directly. Please do wear appropriate laser safety eyewear during the time when operating the device. -
Page 8: Mounting
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P70QA Pulsed Fiber Laser User’s Guide V2.1 2. Mounting Mounting dimensions a) Fiber Laser module dimensions (As shown in Fig. 1). Figure 1 Dimension drawing of laser module (Unit: mm). Isolated output head dimensions (As shown in Fig. 2). -
Page 9: Control Interface
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P70QA Pulsed Fiber Laser User’s Guide V2.1 24V- 24V+ Figure 3 Definition of power line wires c) Make sure that the interface of the external controller matches the laser and the control cable is well connected to the laser’s interface. - Page 10 Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P70QA Pulsed Fiber Laser User’s Guide V2.1 Figure 5 Connect port of controller Table 3 Definition of connect ports of controller PIN No. Name Description 8 bit Parallel port; D0 is minimum bit and D7 is maximum bit;...
-
Page 11: Operation Regulations
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P70QA Pulsed Fiber Laser User’s Guide V2.1 PIN 5 PIN 6 PIN 7 PIN 8 Current ~50 % ~75 % ~87.5 % ~93.75 % 100% b) PIN 17 is the external 5 V input, providing power supply for alarm signal: input current >20 c) Those external input signals (PIN 1-8, 18-20, 22) are connected to the optical coupler inside the system. -
Page 12: Operation Procedures
Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period. Only products with particular defects are under warranty. -
Page 13: Limitations Of Warranty
5.3 Service and repairs Raycus is responsible for all the maintenance, for there is no accessory available inside for users to use. Please contact Raycus as soon as possible when problems under warranty about maintenance happen to the product.