Control Panel; Turning The Appliance On And Off; Air Conditioning Mode - DeLonghi PAC ES Instruction Manual

• When the pipe B1 is not connected, the hole can be closed
with the cap of the flange B5.
NOTE: for semi-permanent installations, it is advisable to leave
a door slightly ajar (even by just 1 cm) to guarantee a proper air
exchange.

CONTROL PANEL

C8
C
C2
C6
DESCRIPTION OF THE CONTROL PANEL (C)
C1 ON/STAND-BY (on/off) key
C2 Mode selection key (conditioning, dehumidifying, fan)
C3 Decrease key
C4 Increase key
C5 Ventilation speed selection key
C6 Timer button
C7 Stand-by indicator
C5
C8 Timer indicator
C6
C9 Air conditioning mode indicator
C7
C10 Dehumidifying mode indicator
C9
C11 Fan mode indicator
C11
C12 Set temperature values, programmed on / off time
C15
C12
C13 Auto ventilation speed indicator
C8
C14 Ventilation speed indicators
C10
C13

TURNING THE APPLIANCE ON AND OFF

Before connecting the plug to the power outlet, make sure that
C14
drain caps (A11)(A12) located on the back of the appliance are
correctly inserted.
C4
Insert the plug into the socket.
The stand-by indicator lights up.
C1
Press the (C1) key to turn on the appliance.
C3
When the appliance turns on it will be activated with the last
function set before it was shut off.
C2
To switch the appliance off, press the
(C1) again.
C12
C9
C10
C11
C15
C8
C10
C14
C11
C3
C2
C5
C6
C7
C9
C12
C13
C4
C1
ON/STAND-BY button
C13
C5
C14
Please note: in order to reduce energy consumption, after few
seconds of inactivity the brightness of the display will be auto-
matically reduced.
Please note: Never turn off the air conditioner by simply pulling
the plug. Press the key in order to put your air conditioner in
stand-by and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status checks.
MODES SELECTION
To select the desired operating mode, press repeatedly the MODE
key (C2) until the desired function is selected.

AIR CONDITIONING MODE

This is ideal for hot and humid weather when the room needs to
be both cooled and dehumidified.
To correctly set this mode:
Press repeatedly the MODE key (C2) until the air condition-
•
ing indicator (C9) appears. The display (C12) will show
the desired temperature.
• To change the temperature to be reached, press the
13
C4
C7
C5
C6
C7
C9
C12
C3
C13
C1
C4
C1