Cleaning And Maintenance; Spare Parts; Technical Specifications - Ape Labs Mobilight User Manual

ape labs mobilight user manual

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free
and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Mainte-
nance and service operations are only to be carried out by authorized dealers.

SPARE PARTS

Should you need any spare parts, please use genuine parts. If the power
supply cable of this device becomes damaged, it has to be replaced by
authorized dealers only in order to avoid hazards. Should you have further
questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply charging adapter: 100V - 240V AC, 50 Hz ~, 60 Hz ~
Power consumption charging adapter: 0,35 A
Type of battery: acid- lead battery 12 V, 7,2 Ah
Power consumption Mobilight: max. 21 watt
Number of channels: 4,5,17,25
DMX-512-connection: wireless DMX
Frequency range: 868 MHz, 912 MHz (depends on country)
Transmit power remote control: <= 25mW e.r.p.
Transmit power DMX-Transmitter: <= 25mW e.r.p.
Maximum ambient temperature Ta: 45° C
Maximum housing temperature TB: 60° C
Minimum distance from flammable surfaces: 0 m
Minimum distance to lighted object: 0 m
Number of LEDs: 2 x 5 watt hp white, 1 x 10 watt md RGB
Beam angle: 15°
Fuse: Microfuse on PCB, Microfuse in charging adapter
Dimensions (LxWxH): depends on type – pls see packaging
Weight: 4,9 kg
The charging adapter must only be connected with an electric installation
carried out in compliance with the IECstandards. The electric installation
must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Please note: Every information is subject to change without prior notice.
Ape labs Lichtprodukte GmbH
D- 97080 Würzburg
www.apelabs.com
Designed & Assembled in Germany © 2010
26