Ape Labs Mobilight User Manual page 20

ape labs mobilight user manual
20
PROGRAM
20 programs are available. All colors and sequences have been prepro-
grammed. You can also change the attributes yourself. For example color
and direction.
We assume you have turned the device on.
1. Press the „PROGRAM" button. The display will show the respective
program. (Normally the display should show „ONE COLOR STATIC".)
Pressing the „+" and „-" buttons will allow you to browse through the
programs.
2. The best thing is to look at them and then confirm with „enter". (If you
are using the remote control, press the „PROG" button. Then press „+"
or „-".)
SPEED
You can adjust the speed of the programs between 90 milliseconds and just
over 9 minutes.
And this is how it's done:
1. Press the „SPEED" button.
2. By pressing the „+" and „-" buttons, you can increase or decrease the
intervals.
3. Confirm with „ENTER".
BRIGHTNESS
The brightness can be adjusted between 10 % and 100 %.
And this is how it's done:
1. Press the „BRIGHTNESS" button.
2. By pressing the „+" and „-" buttons, you can adjust the brightness.
3. Confirm with „ENTER".