Operation - Ape Labs Mobilight User Manual

OPERATION

THE BATTERY
The device uses a battery. The battery lasts about 14 hrs, but you can also
connect the Mobilight to the mains supply for permanent operation.
The battery will need charging for approx. 5 hrs when empty. The LED on
the charger will tell you how things stand.
Red: loading
Green: fully charged (the display also shows a battery symbol)
ON AND OFF
To turn on, press the On/Off button for 2 seconds. To turn off you only need
to press the button briefly.
Operation Standalone: Operate directly with the help of the labeled buttons
Radio remote control: Operate with the help of the buttons and display
Radio DMX transmitter: Wireless DMX via all standard light desks (with
ape labs W-DMX)
THE LIGHT
There are two ways of emitting light
ONE COLOR STATIC: Rigid light with or without white LEDs
PROGRAM: Color change, running-light effects, etc.
STATIC LIGHT
IMPORTANT: The first line in the display should read „ONE COLOR STATIC"
If not, a program is active.
This is how you change it:
1. Press the „PROGRAM" button. Then press the „-" button until „ONE
COLOR STATIC" appears. Confirm with „ENTER".
2. Press the „COLOR" button.
By pressing the „+" and „-" buttons, you can now select colors.
3. Confirm with „ENTER". (If you are using the remote control, press the
„C1" button. Then press „+" or „-".)
ape labs mobilight user manual
19