Operating Determinations - Ape Labs Mobilight User Manual

ape labs mobilight user manual
If the power plug or the device is dusty, the device must be taken out of
operation, disconnected and then be cleaned with a dry cloth. Dust can re-
duce the insulation which may lead to mortal electrical shock. More severe
dirt in and at the device should only be removed by a specialist.
There must never be any objects entering into the device. This is especially
valid for metal parts. If any metal parts like staples or coarse metal chips
enter into the device, the device must be taken out of operation and
disconnected immediately. Malfunction or short-circuits caused by metal
parts may cause mortal injuries.
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Keep away children and amateurs!

OPERATING DETERMINATIONS

This device is designed for professional use, e.g. on stages, in disco-
theques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent
operation breaks will ensure that the device will serve you for a long time
without defects.
Do not shake the device. Avoid brute force when installing or operating the
device.
When choosing the installation-spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. There should not be any
cables lying around. You endanger your own and the safety of others!
This device must never be operated or stockpiled in sourroundings whe-
re splash water, rain, moisture or fog may harm the device. Moisture or
very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never
exposed to the direct smoke jet and is installed in a distance of 0.5 meters
between smoke machine and device. The room must only be saturated with
an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep
away from direct insulation (particularly in cars) and heaters.
Never use the device during thunderstorms. Over voltage could destroy the
device. Always disconnect the device during thunderstorms.
16