Installation - Ape Labs Mobilight User Manual

ape labs mobilight user manual
Always fix the fixture with an appropriate safety-rope.
Please consider that unauthorized modifications on the device are forbid-
den due to safety reasons!
Never remove the serial barcode from the device as this would make the
guarantee void.
If this device will be operated in any way different to the one described in
this manual, the product may suffer damages and the guarantee becomes
void. Furthermore, any other operation may lead to dangers like shortcircuit,
burns, electric shock, crash etc.

INSTALLATION

The device can be installed on the ground or on the wall or ceiling.
Please consider the EN 60598-2-17 and the respective national standards
during the Installation! The installation must only be carried out by an
authorized dealer!
The operator has to make sure that safety-relating and machine-technical
installations are approved by an expert before taking into operation for the
first time and after changes before taking into operation another time.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERI-
ENCE, including (but not limited to) calculating working load limits, instal-
lation material being used, and periodic safety inspection of all installation
material and the projector. If you lack these qualifications, do not attempt
the installation yourself, but instead use a professional structural rigger.
Improper installation can result in bodily injury and.or damage to property.
Before rigging make sure that the installation area can hold a minimum
point load of 10 times the projector's Weight.
Mount the projector with the mounting-bracket to your trussing system
using an appropriate clamp.
For overhead use, always install an appropriate safety bond.
You must only use safety bonds complying with DIN 56927, quick links
complying with DIN 56926, shackles complying with DIN EN 1677-1 and
BGV C1 carbines. The safety bonds, quick links, shackles and the carbines
must be sufficiently dimensioned and used correctly in accordance with the
latest industrial safety regulations (e. g. BGV C1, BGI 810-3).
17