Table of Contents
Advertisement
Available languages
Available languages
ape labs mobilight user manual
22
DMX SETTINGS
DMX ADDRESS:
Setting of DMX address
DMX TAB:
Select DMX mode (RGBWS, EFFECT MODE FIX,
EFFECT MODE RGBW)
STROBE:
Turn strobe channel on/off in RGBWS DMX mode
DMX FAILURE:
What to do if there is no DMX signal?
GENERAL SETTINGS
USE WHITE LEDS:
The white LEDs are activated by an RGB mixed
color (saves battery life)
LED POWER:
Increase battery life by dimming the LEDs
WHITE CORRECTION: Turn color correction adjustment on/off
WHITE CALIB RED:
Adjust color correction – applies to all colors or
programs
WHITE CALIB GREEN: Adjust color correction – applies to all colors or
programs
WHITE CALIB BLUE:
Adjust color correction – applies to all colors or
programs
INFO
SERIAL NUMBER:
XXXXXXXXXXX
FW VERSION:
Firmware version
HOURS:
P = operating hours, C = charge cycles
RF LINK:
Signal strength
TEMPERATURE:
XXXXXXXXXXX
FACTORY RESET
If you are confused about your settings, you can perform a factory reset.
No programs or the like will be deleted, only your personal settings.
Advertisement
Table of Contents
