Download Print this page

Notes For Safe Operation - YASKAWA PG-Z2 Instructions Manual

Dual encoder feedback card

Advertisement

NOTES FOR SAFE OPERATION

Before installation, operation, maintenance or inspection of this option, a technically
qualified individual who is familiar with this type of equipment and the hazards involved
should read this entire manual thoroughly. In this manual, the NOTES FOR SAFE
OPERATION are classified as "CAUTION".
CAUTION
Indicates a potentially hazardous situation that, if not avoided, may result in minor or
moderate injury to personnel and damage equipment. Lock all power sources feeding
the drive in the "Off" position.
It may also be used to alert against unsafe practices.
Failure to heed notices labeled with
situations or equipment damage.
The option card uses a CMOS IC chip. Be careful when handling.
When removing the option card from the drive for transportation or storage, the
card should be placed in the anti-static package it was received in.
DO NOT alter wiring or connect or disconnect connectors while equipment power
is ON.
Failure to observe these cautions may result in injury or equipm ent damage!
Before use,
(1) Before installing the PG-Z2 card, read this manual and the manual for the
installation of the drive.
(2) Before connecting the PG-Z2 or external terminals, turn OFF the main
power to the drive and verify that the CHARGE indicator lamp of the
Drive is OFF.
(3) When ordering the PG-Z2 card, specify the part number and code
number.
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Steps to be taken to insure proper operation and
to avoid malfunctions.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
CAUTION
may result in dangerous
Caution
- 2 -

Advertisement

loading

This manual is also suitable for:

73600-a0251