Call Intercept While Using Answering System; Recording Memo; Handset; Base - VTech 8251 User Manual

NOTES
• If you do not enter a valid remote
access code, the system answers the
call automatically.
• Once the messages have played, the
telephone announces the help menu
options. If you do not press any key
with 20 seconds, the remote access
call ends automatically.
• If the memory is full, the answering
system answers after 10 rings and
announces, "Memory is full. Enter
the remote access code." Enter your
remote access code to access the
messages and announcements.
• When the answering system is turned
off, the telephone answers after 10
rings, and announces, "Please enter
your remote access code."
Call intercept while using
answering system
When a caller is leaving a message
on your answering system, you can
stop recording and talk to the caller by
pressing or

Recording memo

Handset

1. Press in idle mode.
2. Press / to highlight Answering
p q
sys, then press
3. Press / to highlight Record memo,
p q
on the handset.
.
then press
• The handset displays Recording...
and Stop [5].
• The system announces, "Record
after the tone. Press 5 when you
are done." Speak towards the
handset microphone.
4. Press 5 to stop recording. The system
announces, "Recorded." and then
returns to the previous menu. The
system does not save memos shorter
than two seconds.

Base

1. Press Menu
select Answering
2. Press Record memo
MEMO RECORDING
Cancel
• The system announces, "Record
after the tone. Press 5 when you
are done." Speak towards the base
microphone after the tone.
3. When you are done, press
Save to end and save the recording.
• Press Cancel
recording.
66
.
in idle mode, and then
system.
.
to cancel the
Stop &