Table of Contents
Advertisement
4. Lay the conveyor on a flat surface with the chain
facing up. Rorate chain until open link is showing. Pull
up on the chain until the locking pins can be engaged.
Push in both locking pins. This will allow the chain to
be removed at the open link.
Locking pins
5. Wipe the conveyor with a damp cloth. For the chain,
use a soft bristle brush and soap water.
6.. Remove the release sheet and lay it on a flat surface.
Thoroughly clean both sides with a damp cloth
making sure all carbon build up is removed. Allow to
air dry.
IMPORTANT: Rotate two sheets daily for longer life.
Sheets last 4-6 months based on care and volume of
product toasted.
7. Use a damp cloth to remove any carbon build up on
the platen surface.
IMPORTANT: Do not use sharp objects, scotch brite
pads, scouring pads, or abrasive cleaners on the platen, or
teflon release sheets as it will cause irreparable damage.
PREVENTIVE MAINTENANCE
(MOTOR)
To extend the life of your motor,have a factory
authorized service technician add 2-3 drops of 3 in 1
oil on a monthly basis.
Oil
Hole
3
Advertisement
Table of Contents
