Table of Contents
Advertisement
BURN/ELECTRICAL SHOCK HAZARD! Platen area is HOT
and can cause severe burns or severe shock. Keep hands
and objects out of the toaster unit! Failure to exercise
caution may result in serious injury! Follow this procedure
before touching or working on internal apparatus.
Press the Clean icon on the
1
Run/Home screen.
The Clean screen will appear. On
the Clean screen, you can view the
current platen temperature, the
thermometer icon, and the cool-
down temperature set point.
BURN/ELECTRICAL SHOCK HAZARD! Platen area is HOT
and can cause severe burns or severe shock. Keep hands
and objects out of the toaster unit! Failure to exercise
caution may result in serious injury! Turn the unit off,
unplug it and follow the Cool Down procedure before
touching or working on internal apparatus.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified
person to avoid a hazard.
Do not immerse toaster in water. Do not clean with a water
hose or jet spray. Do not use abrasive cleaners, pads or
tools on the platen or the release sheet. Failure to exercise
caution will result in damage to the unit and will not be
covered by warranty. Cleaning and user maintenance shall
not be made by children without supervision.
Gather cleaning materials. You will need clean cloths,
1
neoprene gloves, Foodservice Safe Multipurpose
Detergent Solution, sanitizer solution, and lukewarm
soap and water.
Follow the Cool Down procedure before cleaning.
2
Printed in USA 5/1/2022
Cool Down
WARNING
250
F
120
F
Daily Planned Maintenance
WARNING
WARNING
CAUTION
Wait while the toaster cools
2
down.
The thermometer icon will be
flashing until the current platen
temperature reaches the cleaning
set point temperature. The Cleaning
icon will then appear, indicating it is
okay to clean or work on the
toaster.
Turn the toaster off and
3
unplug. Turn the On/Off switch
located on the bottom right of the
unit to the 'OFF' position. The
green LED switch will also turn
off.
The plug removed from the outlet
shall remain clearly visible to the
operator during the maintenance
procedure. Do not pull on the
cord, grab the plug receptacle
instead.
Remove bun infeed and
4
release sheet.
Lay the release sheet on a flat
surface.
10
CTD & CTDE
Vertical Contact Toasters
301-500revE-EN
Advertisement
Table of Contents
