HP Chromebook 11a Maintenance And Service Manual page 42

Table 5-9 Connector board description and part number
Description
Connector board (includes USB connector)
NOTE: The connector board spare part kit does not include the connector board cable. The connector board
cable is available as spare part number M97112-001.
Before removing the connector board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the connector board:
1. Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect the
connector board cable from the system board.
2. Remove the Phillips M2.0 × 2.7 screw (2) that secures the connector board to the computer.
3. Remove the connector board (3) from the computer.
Reverse this procedure to install the connector board.
Preparation for disassembly on page
Bottom cover on page
Battery on page 23).
21).
Spare part number
M15716-001
21).
Connector board 37