Front Panel Connectors - HP workstation xw5000 Getting Started Manual

front panel connectors

getting started guide
The front panel of the workstations include these connectors:
dual USB
audio line out (speakers or headphones)
microphone
IEEE-1394 (optional on xw5000)
NOTE: The IEEE-1394 connector comes is an optional feature on
the hp workstation xw5000. If you did not order this feature, the
connector comes covered with a removable plug. Flip down the front
panel cover to access the front panel connectors. You can remove this
cover for easier access to the connectors.
1
1 IEEE-1394 (optional for
xw5000)
2 USB
Connect the components:
1. Connect the display cable to the monitor and graphics card
connectors. Lightly tighten the attachment screws.
NOTE: Depending on the graphics card you ordered and whether
your monitor is analog or digital, you may also need to connect a
dongle to convert between digital and analog signals.
2. Connect the mouse and keyboard to the rear panel of the system.
setting up and using your workstation
2
3
3 Microphone
4 Audio Line Out
4
1–5