Summary - HP workstation xw5000 Getting Started Manual

Linux system setup and recovery

summary

2–10
This completes the miscellaneous parameters you can set from the
Linux Setup Tool window. If you want to erase the changes you have
made and keep the current configuration settings, click the Reset
Configuration button.
The Show Summary window, shown below, contains all the
information you entered. To change any choices, click OK to close
the Show Summary window, and click the appropriate parameter box
in the Linux Setup Tool window.
Click OK to close this window.
If you are satisfied with all the information you have entered, click
Save at the bottom of the Linux Setup Tool window to save this
configuration.
NOTE: The system will not let you exit until you have set the root
password.
getting started guide