HP workstation xw5000 Getting Started Manual page 37

there are one or more beeps and the system does not boot.
When your workstation starts, the system tests your hardware for possible problems. If a critical
problem is detected, the system emits audible beeps.
Make sure...
You count the beeps to determine the error
and suggested solutions.
the display is blank.
Make sure...
Both the workstation and monitor power cords
are firmly connected and plugged in.
The outlet power is functioning.
The workstation and monitor are turned on.
(The power light should be illuminated.)
getting started guide
How
See the "Understanding the E-buzzer beep
code" section for more information.
How
Connect the power cords to a working power
outlet and to the rear of the workstation and
the monitor.
Turn on any light switches, power strips, or
surge protectors connected to the outlet.
Turn on the workstation and monitor using the
power button. Make sure that any power strips
are turned on.
troubleshooting
3–3