Restoring Your Os And Software From Cd - HP workstation xw5000 Getting Started Manual

troubleshooting
No. beeps
4
5
6
7

restoring your OS and software from CD

Å
3–12
component
Video Card
PCI Card
BIOS
System Board
Restore the original OS and factory-installed software by using the
CDs provided with your workstation. Carefully read and follow the
instructions that came with the CDs. For questions about problems
with these CDs, contact HP Customer Care.
WARNING: The operations you perform using the recover CDs
permanently erase the contents of your hard disk. Always back up your
data and personal files before using the recovery CDs.
error
Graphics 1. Remove the graphics card
card failure. and reseat it.
2. If the problem persists,
remove the graphics card and
replace it with a good card.
PCI card 1. Remove PCI cards until you
initialization find the one causing the
problem. failure.
2. Reseat the offending PCI
card.
3. If the problem persists,
replace the defective PCI
card.
Corrupted Perform a BIOS Boot Block
BIOS. Recovery. See the hp workstation
xw5000 and xw8000 Technical
Reference Guides at
http://www.hp.com/
go/workstationsupport
Defective Contact HP Customer Care.
motherboard.
solution
getting started guide