Table of Contents
Advertisement
Operation
EMU36493
Flushing device
Check that the flushing device's garden hose
connector is securely screwed on to the fitting
on the bottom cowling. NOTICE: If the gar-
den hose connector is not properly con-
nected, cooling water can leak out and the
engine can overheat during operation.
[ECM01801]
1. Fitting
2. Garden hose connector
3. Flushing device
EMU40751
Installing top cowling
1.
Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
by a Yamaha dealer.
2
1. Rubber seal
2. Bottom cowling
2.
Check that the rubber seal is seated all
the way around the bottom cowling.
50
3
2 1
ZMU07754
1
ZMU07755
3.
Check that all of the cowling lock levers
are pulled outward.
4.
Align the 3 protrusions on the top cowling
with the corresponding holders on the
bottom cowling, and then place the top
cowling on the bottom cowling.
1
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
1
2
3
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
5.
Push the cowling lock levers inward to
secure the top cowling.
2
3
ZMU07756
2
3
ZMU07757
Advertisement
Table of Contents
