List Of Changes For Manual Version; Revision 1.0; Revision 2.0; Revision 3.0 - Technogym BIOCIRCUIT Manual

BIOCIRCUIT - BIOCIRCUIT FREE Pre-Installation Requirements
Rev. 6.0
7.

LIST OF CHANGES FOR MANUAL VERSION

The main changes made to this manual, are listed below in chronological order.

7.1 REVISION 1.0

First released version.

7.2 REVISION 2.0

Changed paragraph "3. Electrical Data/Requirements": added the circuit breakers values.
New paragraph "5.1 Network configuration" added: underlined to use of a broadcast network to
guarantee the correct use of BIOCIRCUIT.
New paragraph "5.2 Broadcast Network" added: included a note to use equipment connected to a
data network or via wireless or via cable.
New paragraph "5.4.1 Ethernet Cabled Network" added: included the possibility to use BIOCIR-
CUIT equipment fitted with UNITY MINI that are connected via Ethernet cable.
Changed paragraph "5.4.5 Firewall Router Rules for Mywellness cloud": added two DNS names.

7.3 REVISION 3.0

Changed paragraph "5.2 Broadcast Network": specified the mandatory use of equipment connect-
ed to a data network or via wireless or via cable.
Changed paragraph "5.3 Access Point": specified the use of only one Professional Access Point for
each Biocircuit with only one SSID.
Changed paragraph "5.4.2 Wi-fi Network": specified the wireless technical characteristics as fre-
quency band, LEASE TIME and SESSION TIMEOUT.
Changed paragraph "5.4.5 Network Bandwidth Requirements": specified the wireless technical
characteristics about frequency band.
Changed paragraph "5.5 Unity Self": added Static IP address.

7.4 REVISION 4.0

Inserted technical data for equipment and Unity Self.
Inserted technical info for the new equipment NEW SYNCHRO that can be inserted in the Biocir-
cuit.
Detailed the network architecture;
Deatiled the network requirements for equipment and Unity Self of Biocircuit.
PIR-00063-EN- Uncontrolled copy if printed - 31 -