Service Fixtures And Tools; Preparation For Servicing - Sanyo DC-TS3000 Service Manual

SERVICING FIXTURES AND TOOLS
(For 2 head 1 speed model,
4 head model)
VHS Alignment Tape
3
JG001E (VP S-LI6 )
1
3
JG001F (VP S-CO1 )
1
3
JG001R (VP S-LI6 H)
1
3
(VP S-X6 )
JG001U
1
JG153 X Value Adjustment
Screwdriver
JG154 Cable
Ref. No. Part No.
JG001E APJG001E00 VHS Alignment Tape
JG001F APJG001F00 VHS Alignment Tape
JG001R APJG001R00 VHS Alignment Tape
JG001U APJG001U00 VHS Alignment Tape
JG001C APJG001C00 VHS Alignment Tape
JG001D APJG001D00 VHS Alignment Tape
JG001V APJG001V00 VHS Alignment Tape
JG002B APJG002B00 Adapter
JG002E APJG002E00 Dial Torque Gauge (10~90gf•cm)
JG002F APJG002F00 Dial Torque Gauge (60~600gf•cm)
JG005 APJG005000 Post Adjustment Screwdriver
JG153 APJG153000 X Value Adjustment Screwdriver
JG022 APJG022000 Master Plane
JG024A APJG024A00 Reel Disk Height Adjustment Jig
JG100A APJG100A00 Torque Tape (VHT-063)
JG154 APJG154000 Cable
JG176 APJG176034 Up-Date Disc
How to use the Servicing Fixture
1. While pressing the POWER button on the set for more than 2 seconds, press the CH DOWN button on the set
simultaneously at the Power OFF. Although the DVD is connected, the DVD mode cannot be selected.
2. Short circuit between TP3001 and Ground with the cable JG154.
(The BOT, EOT, and the Reel Sensor do not work and the VCR deck can be operated without a cassette tape.)
3. In case of using a cassette tape, press the TAPE EJECT button to insert or eject a cassette tape.
Turn on the power and re-check the cable before checking the trouble points.
When you servicing with connection of DVD, perform the operations above step 2 to step 3.
(For 2 head 2 speed model)
VHS Alignment Tape
3
JG001C (VP S-LI6 )
2
3
JG001D (VP S-CO1 )
2
3
JG001V (VP S-X6 )
2
JG022 Master Plane
JG176 Up-Date Disc
Parts Name

PREPARATION FOR SERVICING

JG002B Adapter
JG002E Dial Torque Gauge
(10~90gf•cm)
JG002F (60~600gf•cm)
JG024A Reel Disk Height
Adjustment Jig
Tentelometer
Monoscope, 6KHz (For 2 head 1 speed model, 4 head model)
Color Bar, 1KHz (For 2 head 1 speed model, 4 head model)
Hi-Fi Audio (For Hi-Fi model)
X Value Adjustment (For 2 head 1 speed model, 4 head model)
Monoscope, 6KHz (For 2 head 2 speed model)
Color Bar, 1KHz (For 2 head 2 speed model)
X Value Adjustment (For 2 head 2 speed model)
VSR Torque, Brake Torque (S Reel/T Reel Ass'y)
Brake Torque (T Reel Ass'y)
VSR Torque, Brake Torque (S Reel)
Guide Roller Adjustment
X Value Adjustment
Reel Disk Height Adjustment
Reel Disk Height Adjustment
Playback Torque, Back Tension Torque During Playback
Used to connect the test point of SERVICE and GROUND
Up-Date of the Firmware
- 18 -
JG005 Post Adjustment
Screwdriver
Part No. SV-TG0-030-000
(small)
JG100A Torque Tape
(VHT-063)
Remarks