TechniSat HD-S 261 Instruction Manual page 22

Legal notices
TechniSat hereby declares that the HD- S 261 radio equipment complies
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
from the following website:
http://konf.tsat.de/?ID=23898
The device also bears the CE mark.
TechniSat is not responsible for product damage due to external
influences, wear or improper handling, unauthorised repair, modifications
or accidents.
Subject to change for amendments and printing errors. Version 04/22.
Duplication and reproduction only with the publisher's approval. The
current version of the manual is available in PDF format in the download
area of the TechniSat homepage at www.technisat.de.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
22
Please read this first
Before connecting and using the device, check that everything has been
supplied and familiarise yourself with the
the safety instructions.
The scope of delivery for the HD-S 261 includes:
1 Digital receiver,
1 Quick start manual,
1 Remote control
batteries (2 pcs. 1.5 V AAA micocells)
Safety instructions
For your own protection you should read the safety precautions carefully
before using your new receiver.
The manufacturer accepts no liability for damage caused by
inappropriate handling or by non-compliance with the safety precautions.
Function-related discharge current may occur with electrical equipment.
This is acceptable and poses no risk, even if it is experienced as a slight
tingling. To prevent these discharge currents, mains operated devices
(receivers, TVs, etc.) must always be installed or connected with the
power switched off, i.e., devices must be disconnected from the mains
power supply.
- The device must only be operated in a temperate climate.
- To ensure adequate ventilation, place the unit on a smooth, level
surface and do not place any objects on top of the lid of the device.
There are ventilation slots here, through which heat escapes from the
interior.
- Do not place any burning objects, such as lit candles, on top of the
the device.
- Do not expose the device to dripping or splashing water and do not
place any objects filled with liquid, e.g. vases, on it. If water gets into
the unit, immediately disconnect the mains plug and inform the service
department.
- Do not operate sources of heat near the device that can additionally
heat it up.
- Do not push any objects through the ventilation slots.
- Do not open the unit under any circumstances! You risk receiving an
electric shock. Any necessary intervention should only be performed by
trained personnel. Under the following circumstances you should