Table of Contents
Advertisement
Disabling a node temporarily (when configuring with HSP_V17_0358_001_Link_PN_CAN_V2.0)
You have configured a series of nodes in the TIA Portal, but one node does not physically
exist in the CAN network. To work with the "reduced" network, you can temporarily disable
one or more nodes. Such a CANopen node with its entire configuration remains in the project
but is not downloaded to the PN/CAN LINK. The node does not exist in the configuration that
is used by the PN/CAN LINK. No errors or warnings are generated by the module.
Figure 10-18 Disabling a node temporarily
When such a node appears in the menu, it is marked as "(disabled)".
SIMATIC PN/CAN LINK
Operating Instructions, 03/2022, A5E39895388-AC
Configuring/Programming
10.1 Configuring CANopen Manager
119
Advertisement
Table of Contents
