HP Workstation Z600 Specification page 26

QuickSpecs
System Technical Specifications
Thermal Alert Thermal Alert Thermal Alert Thermal Alert
Remote ROM Flash Remote ROM Flash Remote ROM Flash Remote ROM Flash
ACPI (Advanced ACPI ACPI ACPI
Configuration and Power
Management Interface)
Ownership Tag Ownership Tag Ownership Tag Ownership Tag
Remote Wakeup/Remote Remote Wakeup/Remote Remote Wakeup/Remote Remote Wakeup/Remote
Shutdown Shutdown Shutdown Shutdown
ASF 2.0 Compliant ASF 2.0 Compliant ASF 2.0 Compliant ASF 2.0 Compliant
Instantly Available PC Instantly Available PC Instantly Available PC Instantly Available PC
(Suspend to RAM - ACPI
sleep state S3)
Remote System Remote System Remote System Remote System
Installation via F12 (PXE Installation via F12 (PXE Installation via F12 (PXE Installation via F12 (PXE
2.1) (Remote Boot from 2.1) (Remote Boot from 2.1) (Remote Boot from 2.1) (Remote Boot from
Server) Server) Server) Server)
ROM revision levels ROM revision levels ROM revision levels ROM revision levels
System board revision System board revision System board revision System board revision
level level level level
Start-up Diagnostics Start-up Diagnostics Start-up Diagnostics Start-up Diagnostics
(Power-on Self-Test)
Auto Setup when new Auto Setup when new Auto Setup when new Auto Setup when new
hardware installed hardware installed hardware installed hardware installed
Keyboard-less Operation The system can be booted without a keyboard Keyboard-less Operation Keyboard-less Operation Keyboard-less Operation
Localized ROM Setup Localized ROM Setup Localized ROM Setup Localized ROM Setup
Asset Tag Asset Tag Asset Tag Asset Tag
Per-slot Control Per-slot Control Per-slot Control Per-slot Control
Adaptive Cooling Adaptive Cooling Adaptive Cooling Adaptive Cooling
Pre-boot Diagnostics Pre-boot Diagnostics Pre-boot Diagnostics Pre-boot Diagnostics
Industry Standard Industry Standard Industry Standard Industry Standard
Specification Support Specification Support Specification Support Specification Support
Industry Standard Industry Standard Industry Standard Industry Standard
ACPI ACPI ACPI ACPI
ASF ASF ASF ASF
Monitors the temperature state within the chassis. Three modes:
NORMAL - normal temperature ranges
ALERTED - excessive temperatures are detected. Raises a flag so action can be taken to avoid
shutdown or provide for a smoother system shutdown
SHUTDOWN - excessive temperatures are encountered. Automatically shuts down the computer
without warning before hardware component damage occurs
Provides secure, fail-safe ROM image management from a central network console
Allows the system to enter and resume from low power modes (sleep states).]
Enables an operating system to control system power consumption based on the dynamic
workload.
Makes it possible to place individual cards and peripherals in a low-power or powered-off state
without affecting other elements of the system.
Supports ACPI 2.0 for full compatibility with 64-bit operating systems.
A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen
System administrators can power on, restart, and power off a client computer from a remote location
Allows workstation status to be monitored on a remote console
Allows for very low power consumption with quick resume time
Allows a new or existing system to boot over the network and download software, including the
operating system
Reports the system BIOS revision level in Computer Configuration Utility (F10 Setup). Version is available
through an industry standard interface (SMBIOS) so that management SW applications can use and
report this information.
Allows management SW to read the revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified.
Assesses system health at boot time with selectable levels of testing
System automatically detects the addition of new hardware
Common BIOS image supports System Configuration Utility (F10 Setup) menus in 12 languages with
local keyboard mappings
Allows the user or MIS to set a unique tag string in non-volatile memory
Allows I/O slot parameters (option ROM enable/disable, bus latency) to be configured individually
Fan control parameters are set according to detected hardware configuration for optimal acoustics
Early (pre-video) critical errors are reported via beeps and blinks on the power LED
Revision Supported by the BIOS
Advanced Configuration and Power Management Interface, Version 2.0
Alert Standard Format Specification, Version 2.0
DA - 13277 North America — Version 2 — April 13, 2009
HP Z600 Workstation HP Z600 Workstation HP Z600 Workstation HP Z600 Workstation
Page 26