Download
Share
Print this page
ICP DAS USA M2M-711D Quick Start User Manual
  1. Manuals
  2. Brands
  3. ICP DAS USA Manuals
  4. Measuring Instruments
  5. M2M-711D
  6. Quick start user manual

ICP DAS USA M2M-711D Quick Start User Manual

Hide thumbs Also See for M2M-711D:
  • Faq (12 pages)

Advertisement

Quick Links

Download this manual
M2M-711D Quick Start User Guide
The package includes the following items:
˙One M2M
-711D hardware module
˙One quick start guide
 One Software CD
˙
˙One
Wi-Fi Antenna (ANT-124-05)
 One RS-232 cable (CA-0910)
˙
1. Introduction
The major purpose of this Guide is to help users become familiar with M2M-711D
module quickly. If you want to realize the detail items please refer to user manual.
(CD:\napdos\multimedia\M2M-711D\manual\M2M-711Duser manual.pdf)
M2M-711D provides 2 major technologies on networking:
(1) VxServer mode(Wi-Fi): This connection method needs a Wi-Fi AP (Access Point)
in the working field. M2M-711D connects to Internet via Wi-Fi AP, and then
establishes connection with VxServer Software on PC. The architecture is shown
below:
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the M2M-711D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ICP DAS USA M2M-711D

Summary of Contents for ICP DAS USA M2M-711D

  • Page 1  One RS-232 cable (CA-0910) ˙ 1. Introduction The major purpose of this Guide is to help users become familiar with M2M-711D module quickly. If you want to realize the detail items please refer to user manual. (CD:\napdos\multimedia\M2M-711D\manual\M2M-711Duser manual.pdf) M2M-711D provides 2 major technologies on networking: (1) VxServer mode(Wi-Fi): This connection method needs a Wi-Fi AP (Access Point) in the working field.

  • Page 2: Device Assignment

    (2) Pair-Connection: This communication mode takes two M2M-711D modules, one works as an Ethernet Server; the other works as a Client, and use two computers to test and operate the M2M-711D modules. The architecture is shown below: 2. Device Assignment...
  • Page 3 11111 Shows the local IP or DHCP sequentially 22222 Shows the Monitor’s port of server. 33333 Shows the current setting of Com port. In Wireless mode, it shows the web setting IP. M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 3...

  • Page 4: System Setting

    Interactive display Comport signals. Pair-Connection 3. System Setting The M2M-711D module is built-in web server, the user can configure and operate the M2M-711D by web browser (ex: IE). Note: Users must enter M2M-711D web server by Ethernet in the setting.
  • Page 5 Ethernet default value is 192.168.1.217. The PC and M2M-711D have to set setting in the same network segment. The example of connection setting will be described below and Microsoft Windows XP Professional SP2 is used. The setting of PC: Open the dialogue window of IP to set the IP and subnet mask. The default Ethernet IP of M2M-711D is 192.168.1.217.
  • Page 6 M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 6...
  • Page 7 Communication Test: Click“start Run...” Key in “cmd” and then click “OK” Key in “ping 192.168.1.217” If the network settings are correct, it will show: M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 7...
  • Page 8 After entering M2M-711D, the system divided into two applications: VxServer mode: The PC must install VxServer Software and VxComm Driver in VxServer mode: Step1: VxComm Driver Installation Download VxComm Driver: http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/ Please select the most suitable for your Windows and download the latest version.
  • Page 9 Step3: Set VxServer Mode Open web browser (EX: IE) and key in http://192.168.1.217 and then click Enter to enter Web Config. Key in User name (Default setting: root) and Password (Default setting: icpdas) click “Enter” M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 9...
  • Page 10 Settings in the Wireless Config: (1) Wireless Mode: AP mode (2) SSID, Channel, Encryption and Passphrase are the same with the working field Wi-Fi AP. Others keep the default setting, and then click “Save Setting”. M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 10...
  • Page 11 Finally: Don’t forget to click “Reboot”. Step4: Open VxServer and M2M-711D to establish connection open Virtual Com. Server States Local IP Local Port VxComm Driver States M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 11...
  • Page 12 Open VxComm and add into M2M-711D VxComm Server M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 12...
  • Page 13 VxServer mode error checking: (1) If the 7 segment has error display please check power, network connecting and system settings. (2) Open web browser and key in http://192.168.1.217 to login and repeat the above processes. M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 13...
  • Page 14 Key in User name (Default setting: root) and Password (Default setting: icpdas) and click Enter. Settings in the Standard Config: Operation Mode: Pair-Connection Client Host Name: M2M-711D Server IP: 192.168.1.217 Ethernet IP: 192.168.1.218 M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 14...
  • Page 15 Others keep the default setting, and then click “Save Setting”. Finally: Don’t forget to click “Reboot”. Ethernet Server Setting: After setting Client, users can connect another M2M-711D to Internet without removing Client. And then set the Operation Mode to Pair-Connection Server in the Server’s web.

  • Page 16: Communication Test

    4.5. Step3: Connect VxServer with M2M-711D: In the Standard Config setting web of M2M-711D, users have to set Server IP (For example, the IP in the above diagram is 192.168.1.219) and click “Save Setting” to finish connection.
  • Page 17 Information page, and then we can see the System Sate shows “Communication” or see “Client IP” in the Operation Mode page is correct. Finally, Users can send RS232 data from one PC to another. M2M-711D Quick Start (Version 2.20 Mar/2012) PAGE: 17...