HP Visualize c200 Install Manual page 20

Installing the Main Tray Assembly
NOTE: There will be a one to two minute delay, while the self-tests complete, before any
monitor activity occurs. Power saving monitors may switch to their power saving
mode during this time
10 Pack the old CPU board back in the antistatic bag and place it in the upgrade kit
NOTE: If there are no monitor signals present on any graphics port, the default monitor is
Serial Port 1 (see Figure 11 for connector location). Connect a terminal to Serial Port
1 and use the Boot Console Handler to determine the graphics monitor configuration.
18
This concludes the hardware upgrade.
box and use the documentation provided to return the old parts to Hewlett-Pack-
ard for credit.