Table of Contents
Advertisement
Quick Links
Owners Manual &
Operating Instructions
BUSHMAN DC230-X
230L 12V / 24V DC Upright Fridge
Congratulations on your purchase of a Bushman DC230-X. Please read these instructions carefully
before installation and use.
IMPORTANT INFORMATION
Do not lay your fridge on its back, top or sides or at any angle exceeding 30º. If your fridge has been handled
this way, stand the fridge upright for 12 hrs to allow the internal fluids to redistribute evenly before use.
Never operate your fridge directly from a 240 V or AC power supply.
Do not use a modified sine wave inverter to operate your fridge.
PRIOR TO INSTALLATION
DELIVERY
At delivery, please check that the fridge is complete and is not damaged in any way. Remove all packaging and
securing tapes from the fridge. To avoid injury and causing damage to the appliance, be extremely cautious
when using sharp or pointed tools to complete this task. Do not connect an appliance that has been damaged,
contact Bushman immediately.
INSTALLATION
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bushman DC230 Series
Summary of Contents for Bushman DC230 Series
- Page 1 Operating Instructions BUSHMAN DC230-X 230L 12V / 24V DC Upright Fridge Congratulations on your purchase of a Bushman DC230-X. Please read these instructions carefully before installation and use. IMPORTANT INFORMATION Do not lay your fridge on its back, top or sides or at any angle exceeding 30º. If your fridge has been handled this way, stand the fridge upright for 12 hrs to allow the internal fluids to redistribute evenly before use.
- Page 2 Installation of the DC230-X must be completed by a suitably trained professional only. POWER SUPPLY Your fridge must be connected to a stable and regulated 12 V or 24 V DC power supply only. The compressor will automatically detect which voltage is present and adjust accordingly. If you are using a generator or other power supply, the output must be only a pure sine wave.
- Page 3 Ventilation will have a critical impact on the efficient operation of your fridge. A minimum of 2 vents needs to be provided from the rear of the fridge cavity to the outside environment, or to the main room where the fridge is located.
- Page 4 In our experience this is a 2-person job. If you are unsure at any stage, please call Bushman head office on (03) 8080 9990 for assistance. SWAPPING THE DOOR HINGES AND CORRECTLY ALIGNING THE DOOR HANDLE & CATCH Tilt the fridge backwards 45˚...
- Page 5 Bushman is not liable for any incidental or consequential loss or damages whatsoever as a result of use or misuse of this product. Any statutory warranty also applies.
- Page 6 VENTILATION OPTIONS DC230-X min 600cm Exterior Ventilation min 100mm min 100mm min 280mm min 100mm Interior Ventilation Option 1 Interior Ventilation Option 2 min 100mm min 600cm min 280mm min 100mm Interior Ventilation Option 3 Interior Ventilation Option 4...
- Page 7 TROUBLESHOOTING GUIDE Please check each of these 4 points. All 4 need to be right for your fridge to operate correctly. 1. VOLTAGE The most common cause of an incorrectly functioning fridge, or a fridge that starts and stops and doesn’t get cold, is a lack of consistent voltage.
- Page 8 80 W REFRIGERANT R134a (100g) EXTERNAL W 595 DIMENSIONS D 575 (mm) H 1460 NETT WEIGHT 51kg For after sales service and enquiries, please contact: BUSHMAN FRIDGES 3 Contour Close Research VIC 3095 (03) 9437 0737 info@bushman.com.au Version 1.1 Jul 2022...
Need help?
Do you have a question about the DC230 Series and is the answer not in the manual?
Questions and answers