Advertisement
Quick Links
Owners Manual &
Operating Instructions
BUSHMAN DF30-HD
30L 12V / 24V DC Drawer Fridge / Freezer - Heavy Duty Series
Congratulations on your purchase of a Bushman DF30-HD. Please read these instructions carefully
before installation and use.
WARNINGS
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
The instructions for Class III appliances shall state that it must only be supplied at safety extra-low voltage
corresponding to the marking on the appliance.
This appliance is suitable for camping use.
Do not expose the appliance to rain.
Do not store explosive substances such as flammable propellant in this appliance.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not use electrical appliances inside the food storage compartments of the appliance, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
IMPORTANT INFORMATION
Please do not lay your fridge on its back, top or sides or at any angle exceeding 30º. If your fridge has been
handled this way, stand the fridge upright for 12 hrs to allow the internal fluids to redistribute evenly before use.
Never operate your fridge directly from a 240 V or AC power supply.
Do not use a modified sine wave inverter to operate your fridge.
PRIOR TO INSTALLATION
DELIVERY
At delivery, please check that the fridge is complete and is not damaged in any way. Remove all packaging and
securing tapes from the fridge. Do not connect an appliance that has been damaged, contact Bushman
immediately.
INSTALLATION
Installation of the DF30-HD must be completed by a suitably trained professional only.
Advertisement
Related Manuals for Bushman DF30-HD
Summary of Contents for Bushman DF30-HD
- Page 1 PRIOR TO INSTALLATION DELIVERY At delivery, please check that the fridge is complete and is not damaged in any way. Remove all packaging and securing tapes from the fridge. Do not connect an appliance that has been damaged, contact Bushman immediately. INSTALLATION...
- Page 2 POWER SUPPLY Your fridge must be connected to a stable and regulated 12 V or 24 V DC power supply only. The compressor will automatically detect which voltage is present and adjust accordingly. WIRING Always wire your fridge directly to your battery terminals. Do not run the wires on a shared circuit, via a buss bar or battery management system.
-
Page 3: Warranty
WARRANTY DP Refrigeration Pty Ltd trading as Bushman Fridges ABN 94 615 295 255 (Bushman) warrants, to the original owner, that this product is free from defects in workmanship and material for a period of three (3) years from the purchase date and seven (7) years for the compressor only. -
Page 4: Troubleshooting Guide
TROUBLESHOOTING GUIDE Please check each of these 4 points. All 4 need to be right for your fridge to operate correctly. 1. VOLTAGE The most common cause of an incorrectly functioning fridge, or a fridge that starts and stops and doesn’t get cold, is a lack of consistent voltage. - Page 5 The door has been open for more than 2 minutes. TILT ANGLE EXCEEDS 30˚ The fridge tilt angle exceeded 30˚. This code clears 5 minutes after the tilt angle reduces to below 30˚. TECHNICAL SPECIFICATIONS DF30-HD COMPRESSOR Secop BD35HD VOLTAGE 12V / 24V DC MAX CURRENT 7.5A / 3.75A...
Need help?
Do you have a question about the DF30-HD and is the answer not in the manual?
Questions and answers