Table of Contents
Advertisement
Settings
Menu Item
Description
Controls the language used on the
L
ANGUAGE
InfoCenter.
Controls the brightness of the LCD
B
ACKLIGHT
display.
Controls the contrast of the LCD
C
ONTRAST
display.
Allows you to access protected menus
P
M
ROTECTED
ENUS
by inputting a passcode.
About
Menu Item
Description
Displays the model number of the
M
ODEL
machine.
Displays the serial number of the
SN
machine.
Displays the software part number
M
C
AIN
ONTROLLER
and revision of the main controller.
D
C
Displays the software part number
ISPLAY
ONTROLLER
and revision of the display controller.
Displays the software part number
T
M
RACTION
OTORS
and revision of the traction motors.
Displays the software part number
C
M
UTTER
OTORS
and revision of the cutter motors.
Displays the software part number
B
P
ATTERY
ACKS
and revision of the battery packs.
Accessing Protected Menus
Note:
The factory default PIN code for your machine
is 1234.
If you changed the PIN code and forgot the code,
contact your Authorized Service Dealer for assistance.
1.
In the M
AIN MENU
press the
button.
, scroll down to S
ETTINGS
Figure 13
2.
In the S
and press the
MENUS
3.
To enter the PIN code, use the 2 center buttons
to input each digit, and press the
move on to the next digit. Repeat this step until
the last digit is entered and press the
again.
4.
Confirm the PIN code.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
and
"PIN" displays in the upper right corner of the
screen.
g375695
15
menu, scroll down to P
ETTINGS
button.
Figure 14
Figure 15
Figure 16
ROTECTED
g375693
button to
button
g375692
g377941
Advertisement
Table of Contents
