Royal Sovereign ARP-2208 Manual page 10

3 in 1
Hide thumbs Also See for ARP-2208:
Table of Contents

Advertisement

Available languages

Available languages

Fan Mode
Using the control panel
Press the Fan Mode button until fan mode is selected. The fan indicator light will blink for a few
second and turn solid when set. In fan mode, only the unit will circulate air, while the units
compressor is off.
To change between high and low setting, press the speed button.
To control the direction of the air flow, manually adjust the louvres by using the louvre handle.
Using the remote control
Press the Fan button. The fan indicator light will blink for a few seconds and turn solid when set.
To change between high and low setting, press the appropriate high or low button.
Dehumidifying Mode
Using the control panel
Press the Dehumidifying Mode button until fan mode is selected. The dehumidifier indicator light
will blink for a few second and turn solid when set. In dehumidify mode, only fan runs at low speed
and the temperature is not adjustable.
Using the remote control
Press the Dry button. The fan indicator light will blink for a few seconds and turn solid when set.
Important Note: In dehumidifying mode, the user may want to consider continuous drain option.
Refer to Safety Precautions, Maintenance and Continuous Drainage section of
this manual.
Cooling Mode
Using the control panel
Press the Cooling Mode button until cool mode is selected.The cool indicator light will blink for a
few second and turn solid when set. Press the up or down icons to set the desired temperature. The
display will show the current set temperature
To change between high and low setting, press the speed button.
Important Note: For optimal operation, shorten the length of the air duct and keep unit away from
direct sunlight. To control the direction of the air flow, manually adjust the louvres
by using the louvre handle.
Using the remote control
Press the Cool button. The cool indicator light will blink for a few seconds and turn solid when set.
To change between high and low setting, press the appropriate button. To change the temperature,
press the up/down button.
-9-

Advertisement

Table of Contents
loading

Table of Contents