HP Vectra Vli 8SF User Manual page 32

WARNING
3 Replacing Hardware Components
Replacing the Slim CD-ROM Drive
Replacing the Slim CD-ROM Drive
To avoid electrical shock and harm to your eyes by laser, do not open the laser
module. The laser module should be serviced by service personnel only. Do
not attempt to make any adjustment to the laser unit. Refer to the label on the
CD-ROM for power requirements and wavelength. This product is a class 1
laser product.
1 Remove the computer's cover (described in this chapter).
2 Remove the drive's connector.
3 Press the retaining clip on top of the drive tray and slide it backwards
to remove it.
4 Unlatch the CD-ROM drive to remove it from the drive tray.
28 English