HP Vectra Vli 8SF User Manual page 27

Removing the Cover
Replacing the Cover
Removing and Replacing the Cover & Front Panel
Before removing the cover, switch off the monitor and PC, disconnect
all power cords and any telecommunication cables. If necessary, unlock
the cover at the rear of the PC.
1 Unfasten the thumb screw at the rear of the PC, open the rear
latches and slide the cover backwards to remove it.
2 If replacing the fan, remove the front panel.
Before replacing the cover, ensure that all internal cables are properly
connected and safely routed.
1 If necessary, replace the front panel.
2 Align the cover with the arrows indicated and replace it.
3 Close the latches on the rear of the PC and fasten the thumb screw.
4 If required, lock the cover at the rear of the PC.
3 Replacing Hardware Components
Removing and Replacing the Cover & Front Panel
English 23