First, Turn Off Your PC
To Go to the HP
Summary Screen
To Go to the Setup
Program
3 Troubleshooting Your PC
HP Setup Program
HP Setup Program
Check your PC's configuration when you first use the PC and each time
after you install, remove, or upgrade accessories. Follow these
instructions:
Turn on the display and then the PC. If the PC is already turned on, save
your data and exit all programs. For Windows NT 4.0 and Windows 95,
use the Shut Down command.
While the Vectra logo appears on your display, press
you to the HP Summary Screen. The Summary Screen will appear for
only a short time. To retain the screen indefinitely (until you decide to
leave it), press
.
To go immediately into the Setup program while the Vectra logo
appears on your display (and bypass the Summary Screen), press
instead of
.
66
English
. This will take