Removing And Replacing The Cover; Removing The Cover - HP Vectra VL6 6 User Manual

WARNING

Removing and Replacing the Cover

For your safety, never remove the PC's cover without first removing
the power cord from the power outlet, and any connection to a
telecommunications network. Always replace the cover before
switching the PC on again.

Removing the Cover

1 Switch off the display and the PC.
2 Disconnect the power cords from the power outlets, the PC, and the
display. Disconnect any connection to a telecommunications
network.
3 Press the central latch down to unlock the front panel.
4 Remove the front panel by pressing the two tabs down, pivoting the
front panel downward, and lifting it off.
5 If necessary, unlock the cover using the key provided with the PC.
6 Placing your hands on the sides of the cover, push the cover forward
by about 2 cm (about 1 inch) and lift it off.
2 How to Install Accessories In Your PC
Removing and Replacing the Cover
English 19