Table of Contents
Advertisement
Warranty Information
Limited Warranty – Activate online at oneida-air.com/warranty
Oneida Air Systems®, Inc. (OAS) warrants the products it manufactures for a period of 1 or more years, depending on the product, to the
original purchaser from the date of purchase, unless otherwise specified. Items not manufactured by Oneida Air Systems are limited to
their own manufacturer's warranties. All electrical items such as magnetic starters, remotes, sensors, pumps, bin sensors, bag grippers,
etc. and accessories are limited to 90 days. Oneida Air Systems warrants that the product will be free from defects in materials and
workmanship.
This is Oneida Air Systems' sole written warranty and any and all warranties that may be implied by law, including any merchantability
or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. Oneida Air Systems does not warrant
or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. This warranty
does not apply to defects due directly or indirectly to misuse, negligence, accidents, abuse, repairs, alterations, improper wiring or lack of
maintenance. In no event shall Oneida Air Systems' liability under this warranty exceed the purchase price paid for the product and any
legal actions brought against Oneida Air Systems shall be tried in the State of New York, County of Onondaga.
The buyer is cautioned to install and operate Dust Collectors in accordance with prescribed Federal, State, OSHA, NFPA, local codes
and regulations. This equipment should be installed/wired by a licensed electrician following all applicable codes. Local codes can be
significantly different from national codes. The customer assumes the responsibility for contacting their insurance underwriter with
regard to specific application requirements of venting or if additional fire protection and safety equipment may be required. Oneida Air
Systems shall in no event be liable for death, injuries to persons or property or for incidental, and contingent, special, or consequential
damages arising from the use of our product.
Oneida Air Systems makes every effort to accurately represent our products and prices, however Oneida Air Systems reserves the
right to make changes to products and prices at any time. As a manufacturer, Oneida Air Systems reserves the right to change product
specifications at any time in an effort to achieve better quality products.
ONEIDA AIR SYSTEMS SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO
PERSONS OR PROPERTY OR FOR INCIDENTAL, AND CONTINGENT, SPECIAL, OR
CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCT.
SAFETY WARNING - PLEASE READ
Before Purchasing or Installing a dust collection system the buyer is cautioned to do so in accordance with prescribed Federal, State,
Local, OSHA, NFPA, and any other applicable codes or regulations relating to the type of dust(s) you are collecting.
SOME TYPES OF DUST UNDER CERTAIN CONDITIONS HAVE THE POTENTIAL TO BE EXPLOSIVE.
Oneida Air Systems is not responsible for how the dust collector is used or installed. Dusts with deflagration or explosion risks, such as
wood dust, may require additional safety equipment including but not limited to; venting, spark detection, suppression systems, back
draft dampers or may require installation in an outside location or in a protected area away from personnel. The customer assumes the
responsibility for contacting their insurance underwriter with regard to specific engineering controls or application requirements. (We
suggest you reference NFPA 664, 654 and 68 codes for more information) Oneida Air Dust Collection Systems may not be suitable for
some applications and are not designed to be used in explosive atmospheres. Oneida Air Systems equipment should only be installed and
wired by a licensed electrician following all applicable local and national electrical codes.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are: Lead from lead-based paints; Crystalline silica
from bricks, cement and other masonry products; Arsenic and chromium from chemically-treated lumber; etc.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals,
work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles. Oneida Air Systems recommends using additional approved safety equipment such as an approved OSHA and
NIOSH dust mask or respirator.
oneida-air.com
23
Advertisement
Table of Contents
