Table of Contents
Advertisement
Tips and Tricks (Cont.)
Mount flex hose to the bottom of the Cyclone instead of
2
mounting the Cyclone directly to the lid. The components
you would need to complete this as shown in [FIG. 9a] are:
a. (x2) 6" Collared Flange*
b. (x2) Quick-Release Hose Clamp*
c. 6" Flex Hose. 5' is the shortest length we offer. If
needed, you can purchase longer lengths for your
setup*
d. Lid
e. Drum
f. Gasket/silicone for an air tight seal*
g. A Wall Mount or stand to support the Cyclone and to
easily remove the lid when emptying your drum
[FIG. 9b].(SMS050600)
Note: All components are available on our website.
*6" Dust Bin Hose Connection Kit (KDZ000013)
c
b
d
f
e
FIG. 9a
a
oneida-air.com
FIG. 9b
g
17
Advertisement
Table of Contents
