BWI Eagle AIR-EAGLE XLT Product Information Bulletin
900 mhz rf transceiver
Hide thumbs
Also See for AIR-EAGLE XLT:
- Manual (10 pages) ,
- Product information bulletin (4 pages) ,
- Product information bulletin (3 pages)
Advertisement
Quick Links
AIR-EAGLE
900 MHz RF Transceiver
MODEL 441-40100-AC
DESCRIPTION
The A
-E
XLT TRX is an R.F. transceiver capable of transmitting
IR
AGLE
and receiving commands from up to 2500 feet away (longer ranges
can be achieved with external high gain antennas). This model comes
equipped with one dry contact input and one 5amp relay outputs.
When combined with another transceiver this allows the user to
transmit information out and receive a confirming signal back that the
operation was performed. This unit has seven user-selectable network
frequencies to allow multiple systems to operate simultaneously in the
same area without interference.
APPROVALS
United States (FCC)
Canada (IC)
INSTALLATION
DISCONNECT Power from all equipment before installation.
1.
Mount the transmitter in a convenient location.
2.
Install input wiring to terminal strip.
3.
Install antenna onto antenna connector located on the top of the
enclosure.
4.
Connect supplied power input cable to your external power source.
TERMINAL STRIP WIRING
TER 3
DRY CONTACT INPUT
RELAY OUTPUT
1
Input 1 C
1
2
Input 1
2
3
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
®
XLT
MCQ-XB900HP
1846A-XB900HP
TER 2
TER 1
AC/DC POWER INPUT
N/O
1
100-250 VAC
C (common)
2
100-250 VAC
N/C
3
Ground
PRODUCT INFORMATION
BULLETIN
Dimensions (with mounting plate) 7.07L x 3.57W x 1.62H
CONTROLS AND INDICATORS
Power – LED1
Illuminates green when unit is powered
TX – LED2
Illuminates red when unit is transmitting
Relay – LED3
Illuminates green when relay is energized
RF module that sends data to the remote
RF1
receiver
Seven dip switches for selecting options and
SEL1
network frequency
TER3
Dry contact input
TER2
Relay output
TER1
Power Input
Advertisement
Related Manuals for BWI Eagle AIR-EAGLE XLT
Summary of Contents for BWI Eagle AIR-EAGLE XLT
- Page 1 105 Bonnie Drive PRODUCT INFORMATION Butler, PA 16002 724-283-4681 BULLETIN 724-283-5939 (fax) www.bwieagle.com ® AIR-EAGLE 900 MHz RF Transceiver MODEL 441-40100-AC DESCRIPTION The A XLT TRX is an R.F. transceiver capable of transmitting AGLE and receiving commands from up to 2500 feet away (longer ranges can be achieved with external high gain antennas).
- Page 2 SPECIFICATIONS AIR-EAGLE ® 900 MHz RF Transceiver AC Input 100-250 VAC, 5 W, 50/60 Hz MODEL 441-40100-AC RF Output Power 250 mW Transmit Data Dry Contact Input SPDT 5 amp @ 120VAC or 30VDC per OPTIONS & FREQUENCY SET-UP Relay Contact channel Fuse Protected 1 amp...
- Page 3 Some jurisdictions do not allow the exclusion of implied warranties so this limitation may not apply to you. To obtain warranty service, contact BWI Eagle for a return material authorization. When returning equipment to BWI Eagle, the customer assumes the risk of damage or loss during shipping and is responsible for the shipping costs incurred.