If The Sampler Does Not Work - Honeywell GA-SP01 User Manual

If the Sampler Does Not Work

If you encounter a problem, calibrate the sampler. If this does not solve the problem follow the solutions listed in Table 9. If you still
are unable to correct the problem, contact BW Technologies using one of the numbers on page 2
Problem
Sampler does not turn on.
Continuous low flow alarm.
System fault alarm.
Sampler automatically turns off.
Table 9. Troubleshooting Tips
Possible Cause
No batteries.
Depleted batteries.
Damaged or defective sampler.
Extreme environmental change has
formed condensation in the pump
mechanism.
Automatic Shutdown feature activated
due to weak batteries.
optimumstores
www.
Shop for BW products online at:
If the Sampler Does Not Work
Solution
→ Install batteries.
→ Replace batteries.
→ Contact BW (see page 2).
→ Wait approximately 15 minutes for
the condensation in the sampler to
clear.
→ Replace batteries.
.com/bw
The Sampler
19