The Sampler
Users Manual
If the sampler is on, turn off the sampler before replacing the
batteries.
1. Loosen but do not remove the #4-40 x 3/8" button head
screw on the side of the sampler. The screw may not be
included in certain regions.
2. Spread the cowl to disengage it from the body of the
sampler.
3. Rotate the cowl upwards.
4. Remove the two batteries.
5. Install new batteries, observing polarity.
6. Attach the cowl.
7. Rotate the cowl downward until it snaps into position.
Tighten the #4-40 x 3/8" button head screw.
Table 6. Replacing the Batteries
Item
#4-40 x 3/8" button head screw (may
A
not be included in certain regions)
Cowl
B
C
Batteries
16
Description
www.
Shop for BW products online at:
1
3
-
Figure 5. Replacing the Batteries
optimumstores
.com/bw
2
+
-
+