Replacing a Filter
The filter will need to be changed when it becomes clogged
with dirt.
1. Remove the filter plug assembly from the sampler.
2. Remove the clogged filter and insert a new filter, ensuring
that the filter is firmly seated into the plug and the open end
of the filter is facing out.
3. Insert the filter plug assembly into the sampler, ensuring
the filter enters the gasket filter opening.
optimumstores
www.
Shop for BW products online at:
Table 7. Replacing a Filter
Item
Description
Filter plug
A
B
Filter
Open end of filter
C
D
Filter plug assembly
Gasket filter opening
E
1
3
4
5
Figure 6. Replacing a Filter
.com/bw
The Sampler
Maintenance
2
17