Product Features; Powerful Hardware; Perfect Functions - ZLG CANFDNET-200U User Manual

CANFDNET-200U
High-Performance Dual-Channel Ethernet to CAN (FD) Converter User Manual

1.2 Product Features

1.2.1

Powerful Hardware

⚫
High-speed 600MHz main-frequency 32-bit processor;
⚫
10M/100M self-applicable Ethernet interface, 2 kV electromagnetic isolation;
⚫
Vehicle dual-wire Ethernet, meeting the OPEN Alliance BroadR-Reach specification
⚫
Two CAN (FD) ports, 2.5 kVDC withstand voltage isolation;
⚫
Embedded hardware watchdog;
⚫
Rated power supply voltage range 9V-48V DC;
⚫
Operating temperature: -40° C to +85° C;
⚫
Humidity: 5%-95% RH, no condensation;
⚫
Rugged metal housing, SECC metal (1.1 mm);
⚫
Designed specifically for industrial environments.
1.2.2

Perfect Functions

⚫
CAN(FD) interface functions supported:
◼
Support baud rate 40K-5Mbps, baud rate can be set arbitrarily;
◼
Support various controller types: CAN, CANFD ISO or CANFD Non-ISO;
◼
Support the software terminal resistance switch;
◼
Support message filtering;
◼
Support millisecond-level message timing sending;
◼
Support bus utilization reporting;
◼
The message sending buffer can be set, and the user can choose the most suitable balance
between real-time and large-capacity buffering;
⚫
Multiple work modes supported:
◼
Work modes: TCP Server, TCP Client, UDP;
◼
Supports a maximum of two TCP servers, each of each supports a maximum of 16 connections; or
supports a maximum of 16 TCP Client or UDP connections;
◼
In each mode, you can choose to upload the CAN (FD) channel message and error message, which
can be flexibly used in various scenarios;
◼
The TCP Server/Client mode connection has a built-in TCP keep-alive mechanism to ensure
reliable TCP connections;
◼
In TCP Client mode, the network will automatically reconnect after disconnection, and the TCP
connection will be established reliably;
◼
In UDP mode, support multicast, IP segment and other operations to support multiple users to
control multiple CAN (FD) channels at the same time;
◼
Supported TCP/IP protocols include IP, ARP, ICMP, UDP, DHCP, DNS, TCP;
◼
Flexible CAN (FD) packet settings meet various packet requirements of users;
◼
The communication protocol is open, and the secondary development interface function library is
provided (Windows and Linux platforms supported);
⚫
You can configure the working parameters by using the configuration tool, and provide the secondary
development interface function library (Windows, Linux platforms supported);
⚫
Support TCP/UDP data conversion between vehicle Ethernet and Ethernet;
⚫
Support local system firmware upgrade.
©2021 Guangzhou ZLG Electronics Co., Ltd.
2
User Manual