Table of Contents
Advertisement
CANFDNET-200U
High-Performance Dual-Channel Ethernet to CAN (FD) Converter User Manual
[CANFD acceleration] is determined by the user. When [No] is selected, all CANFD messages sent are not
accelerated; otherwise, they are all accelerated.
Click [OK]. ZCANPRO will connect to the device.
After starting the device, you can use ZCANPRO to communicate with the device. To verify whether the
device communication is normal, connect CAN0 and CAN1 of the device (the baud rate must be the same) to
carry out the message sending and receiving test.
Click the [Send Data] icon on the ZCANPRO interface and select [Normal Send]. On the displayed sending
interface, select [Channel] to specify the sending channel, and click [Send Now] to send the message.
As CAN0 is connected to CAN1, the message sent by CAN0 will be received by CAN1. You can see two
messages on the main interface. One is the sending message and the other is the receiving message, from
CAN0 and CAN1 respectively, as shown in Figure 5.9.
Figure 5.8 Starting the CANFDNET-TCP client
15
©2021 Guangzhou ZLG Electronics Co., Ltd.
User Manual
Advertisement
Table of Contents
