ZLG CANFDNET-200U User Manual page 29

CANFDNET-200U
High-Performance Dual-Channel Ethernet to CAN (FD) Converter User Manual
CAN (FD) to Ethernet
Vehicle Ethernet to
Ethernet
Property Name
Within the specified ID
Filter conditions
range (whitelist)
Enable
Frame type Standard frame
Start ID
End ID
Property Name
Enable
ID
Sending cycle
Number of Sending
Frame type Standard frame
Frame format
Frame protocol
CANFD
acceleration
Data
Property Name
Enable
Work mode
Local port
CAN (FD) to
Ethernet
Vehicle Ethernet
to Ethernet
Table 7.11 Filter setting description
Default
Within the specified ID range (whitelist): Frames within the preset ID range will be
Beyond the specified ID range (blacklist): Frames within the preset ID range will not be
Disable
0
0
Table 7.12 Description of the setting of timed sending interface
Default
Disable
Selecting
0 Message ID, expressed in hexadecimal notation.
1000 Timed sending period, in ms.
The number of times a message is sent. The value ranges from 0 to 65535. When it is
0
0, it means an unlimited number of sending times.
Send message type, standard frame or extended frame.
Data frame Send message format, data frame or remote frame.
Send message protocol, CAN or CANFD;
CAN
When the controller type is CAN, only CAN can be selected.
When the frame protocol is CANFD, this item is valid; acceleration or no acceleration
-
can be selected.
- Send message data, hexadecimal, separated by spaces.
Table 7.13 CAN(FD) to Ethernet interface description
Default
-
Selecting
TCP Server: The device acts as a server and waits for client connections;
TCP Client: The device as a client actively connects to the target server;
TCP server
UDP: The device uses UDP for communication and does not need to establish a
connection.
Local working port. The value ranges from 0 to 65535. When it is 0, the system
8000 randomly allocates ports. When the work mode is TCP Server or UDP mode, the port
cannot be set to 0;
CAN (FD) message to Ethernet settings, that is,work mode
- settings. See Table 7.13. Select View advanced configuration to
view more settings
- Vehicle Ethernet to Ethernet settings. See Table 7.14
Parameter Description
Select the corresponding item to enable.
Standard frame: Set the filter message type to standard frame;
Extended frame: Set the filter message type to extended frame.
Start ID of the filtered message, expressed in hexadecimal notation
End ID of the filtered message, expressed in hexadecimal notation
Parameter Description
means enabling.
Parameter Description
indicates enabling; one enable item is selected by default.
26
received;
received.
©2021 Guangzhou ZLG Electronics Co., Ltd.
User Manual