Unpackingflex; Tilt Backwardsby45°In Thenormalcondition; Rubber Stopper - NewLine FLEX TT-2721AIO User Manual

・UnpackingFLEX
1. Lay the carton flat and takeout
the top cover of the carton.
・Tilt backwardsby45°in thenormalcondition
45°
・ R ubberstopper(optional) ・

Rubber stopper

Installation procedure:
Open the rear bracket to the maximum angle, and then attach two "rubber stoppers" on the left
and right recesses of the rear bracket.
Function: "rubber stoppers" are used to limit the angle of FLEX rear bracket, so as to avoid
the possibility of machine damage due to tilting forward caused by accidental collision with
FLEX.
2. Take out the 3. Take out FLEX and the
upperprotective protective cushion out ofthe
cushion. carton.
45°
3
4. Remove FLEX out of the
protectivecushion.
Rubber stopper
FLEX U ser M a n u a l