Using A Handset, Headset, And Speakerphone; Using A Handset; Using A Headset - Cisco 7931G User Manual

Using a Handset, Headset, and Speakerphone

You can use your phone with these audio devices: a handset, headset, or speakerphone.
The phone is off-hook when the handset is lifted or another audio device is in use.
The phone is on-hook when the handset is in its cradle and other audio devices are not in use.

Using a Handset

If you want to...
Go off-hook
Go on-hook
Switch to the speakerphone or a
headset during a call
Adjust the volume level for a
call

Using a Headset

Your phone supports four- or six-wire headset jacks for wired headsets.For information about
purchasing headsets, see
You can use a headset with all of the controls on your phone, including the Volume button and
If you want to...
Toggle headset mode on and off Press
Switch to a handset
Adjust the volume level for a
call
If you use AutoAnswer, see
52
Then...
Lift the handset.
Replace the handset in the cradle.
Press or
Press the Volume button during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.
Headset Support, page 13.
Then...
(
headset is assigned to button 23.)
Lift the handset (without pushing any buttons).
Press the Volume button during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.
Using AutoAnswer with a Headset or Speakerphone, page 54.
( ), then hang up the handset.
) to toggle headset mode on and off. (Typically,
.
OL-15791-01